LG 50PK950 - Manual (Page 20)

PREPARATION
P
R
EP
A
R
AT
IO
N
20
STAND INSTRUCTIONS
(For 47/55LX9500, 47/55LEX8)
ꔛ Image shown may differ from your TV.
INSTALLATION
!
?
!
?
NOTE
► When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
2
Assemble the parts of the STAND
BODY with the STAND BASE of the
TV.
At this time, tighten the screws that
hold the
STAND BODY on.
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
4 Assemble the part of the STAND
REAR COVER with the TV.
3 Install the 4 screws into the holes shown.
M4 x 22
M4 x 12
STAND BODY
STAND BASE
STAND REAR
COVER