LG 37LG710H - Manual (Page 13)

PREP
AR
A
T
ION
13
CABLE MANAGEMENT
■ Image shown may differ from your TV.
Connect the cables as needed after reading
the section titled EXTERNAL EQUIPMENT
SETUP.
To help prevent the power cable from being
removed by accident, secure the power cable
with the included P
PROTECTIVE BRACKET
/Screw. The 32LG710H uses a Plug in type
Holder instead of using a screw.
Install the CABLE MANAGEMENT CLIP as
shown.
If a CABLE HOLDER was included with your
TV, install it as shown.
1
2
Put the cables inside the CABLE MANAGEMENT
CLIP and snap it closed. 3
G G Do not hold the CABLE MANAGEMENT CLIP
when moving the TV.
- If the TV is dropped, you may be injured or the
product may be broken.
G G With some TVs, the PLUG IN TYPE HOLDER
and the CABLE HOLDER are included. If these
holders are inserted into the hole provided on
back of the TV, they cannot be removed.
NOTE !
CABLE MANAGEMENT CLIP
CABLE HOLDER
PROTECTIVE BRACKET/Screw
(This feature is not available for
all models.)
PLUG IN TYPE HOLDER
(For 32LG710H model)
Or