HP StoreEver Ultrium Tape Drives - Manual (Page 11)

Table 4 libuuid site and filename details (continued)
Potentially compatible versions Site Operating system
e2fsprogs 1.36 and e2fsprogs
1.39
http://e2fsprogs.sourceforge.net SLES 11 up to SP3 (x86 and x64)
not required not required Mac OS X 10.6 through 10.9
Instructions, comments:
Find the readme file in the download and follow the process as closely as you can.
Xcode
Table 5 Xcode site and filename details
Potentially compatible versions Site Operating system
not required not required RHEL 5.0 update 5 and later (x86 and
x64)
not required not required RHEL 6.0 up to update 4 (x86 and
x64)
not required not required SLES 11 up to SP3 (x86 and x64)
Xcode package on the OS X DVD Provided with the OS X DVD Mac OS X 10.6 through 10.9
Instructions, comments:
Find the readme file in the download and follow the process as closely as you can.
Installation of HP StoreOpen Automation
Obtain the binary file and copy the file to the host computer that you will use.
To install on a RHEL or SLES system
1. Unzip the installer package:
$ gunzip <file_name>
2. Copy the resulting tar file to the root directory.
3. Untar the package. For example, on RHEL, for the 32–bit package:
$tar-xvf <file_name> -C /
To install on a MacOS X system
Install the HP StoreOpen Automation package by double-clicking on the .dmg file.
Uninstalling HP StoreOpen Automation
To remove from an RHEL or SLES system
To un-install HP StoreOpen Automation open a terminal console as root, and issue the following
command.
$ rm –r /usr/local/bin/*ltfs* /usr/local/lib/*ltfs* /usr/local/etc/*ltfs*
Below is a list of individual files and directories removed by that command.
•
Under /usr/local/bin/
/usr/local./bin/ltfs
/usr/local/bin/ltfscap
/usr/local/bin/ltfsck
Installation of HP StoreOpen Automation 11