HP LD4730 47-inch Micro-Bezel Video Wall Display - Manual (Page 9)

1 Product features
HP Digital Signage Displays
The LD4730 and LD4730G digital signage displays have a wide-aspect active matrix thin-film
transistor (TFT) panel. The displays' features include the following:
● 119 cm (47 inch) diagonal screen with 1366 x 768 native resolution
● Ultra-slim bezel for minimal visual distraction and near-seamless tiling
● Landscape and portrait wall mounting positions
● Video inputs for VGA, Video Over Ethernet, and DisplayPort
● Audio input jack and external speaker ports
● Infrared remote control
● Remote, centralized control with HP Network Sign Manager
● External IR Sensor for group or selected control of displays in a video wall
● Tiling for video walls
● Color matching and calibration for all displays in a video wall
● Mercury-free LED backlight
● Ambient light sensor and high brightness for energy savings and good visibility in any light
● Local dimming for enhanced contrast in dark areas of the image
● On-Screen Display (OSD) menu in several languages for ease of setup and screen optimization
● Screen adjustment buttons (Power On/Off, OSD Controls, MENU, and INPUT) on the back of
the display
● Management software for stand-alone displays on or off a network
● DDC/CI interface to allow control of the display from an attached PC
● User controls to adjust Picture, Tile Mode, Timer, Energy Saving, Aspect Ratio, Audio, and
additional setup options
● Plug and play capability if supported by the operating system
● Security cable provision on rear panel to lock down the display and help prevent theft
● High-bandwidth Digital Content Protection on the DisplayPort input
● Temperature Sensor
● Support VESA compliant mounting interface with choice of 400 x 200 mm (15.74 x 7.87 in) and
400 x 400 mm (15.74 x 15.74 in) hole patterns
In addition, the LD4730G model features a protective glass overlay with an easy-to-clean coating.
ENWW HP Digital Signage Displays 1