3 configuration examples, Assigning operators to processes – HP Intelligent Management Center Licenses User Manual
Page 27
3 Configuration examples
Assigning operators to processes
The following example illustrates how to create and assign an operator as an SOM processor.
1.
Log in to the iMC system.
2.
Click the System tab on the top navigation bar, and select Operator in the Operator
Management area.
3.
Click Add.
4.
Type basic information for the iMC operator.
5.
In the SOM Processes Need to Audit area, specify a self-service account by clicking Select
Account or Add Account. The selected account will be used to log in to the SOM system.
6.
Click the expansion icon to expand iMC Platform – VLAN Manager, and click on the VLAN
Configuration Changes check box.
7.
Click OK.
Figure 30 Add an operator
8.
Log in to the SOM system as an administrator.
9.
From the left navigation tree, select Process Management
→Network Maintenance
Process
→VLAN Configuration Changes.
10. Right-click on VLAN Configuration Changes, and select Config Process.
Assigning operators to processes
27