HP Workstation x1100 - Manual (Page 10)

Introducing the Fire GL2 7
Q
UICK
I
NSTALLATION
♦
Brief instructions on how to get to work with the Fire GL2 in the
shortest possible time.
♦
Recommended for experienced users and system administrators
only.
♦
For more detailed information on installation and operation of your
graphics accelerator, please refer to the corresponding sections of
the Fire GL2 User’s Guide.
Installation Steps
1. De-install the drivers and software for your old graphics card.
2. Set the display driver to Standard VGA.
Disable any on-board graphics solution on the motherboard.
3. Shut down and disconnect your computer system.
4. Remove the installed (AGP, PCI, or ISA) VGA card.
5. Install the new Fire GL2 card.
6. Reassemble and connect your computer system.
7. Install the Fire GL2 drivers and configuration software from the
Fire GL CD:
⇒
automatic Quick Start utility or
⇒
Start > Run > START EXE