Power capping, Power capping supported servers and chassis, Power capping requirements – HP ProLiant DL170e G6 Server User Manual
Page 5
Power capping 5
Power capping
Power capping supported servers and chassis
The following server products support power capping:
•
HP ProLiant SL160s G6 Server (with BIOS of O33-05192011 or later)
•
HP ProLiant SL165s G7 Server (with BIOS of O37-08102011 or later)
•
HP ProLiant SL170s G6 Server (with BIOS of O40-05112011 or later)
•
HP ProLiant SL230s Gen8 Server
•
HP ProLiant SL250s Gen8 Server
•
HP ProLiant SL270s Gen8 Server
•
HP ProLiant SL335s G7 Server (with BIOS of A24-later than 02042011)
•
HP ProLiant SL390s G7 Server (with BIOS of P69-050511 or later)
•
HP ProLiant SL210t Server
•
HP ProLiant SL4540 Gen8 Server
•
HP ProLiant SL4545 G7 Server
Power capping requirements
Observe the following minimum firmware requirements:
•
For HP ProLiant SL s6500 Chassis only, SL Chassis Firmware must have version 4.30 or later.
•
All nodes in the chassis must have LO100 Advanced Pack, iLO Scale Out, or iLO Advanced License.