HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 21)

Troubleshooting 21
Error message Resolution
Firmware update failed on module See the vcsu-####.log file.
Unable to transfer file to module Verify connectivity between the client and the enclosure.
Unable to configure module for update Verify connectivity between the client and the enclosure.
Another firmware update is currently in progress Wait until the current update is complete before attempting
to update the firmware.
The specified activation ordering method is not
valid Verify that the activation order method (-oe or -of) is
correct.
Signature Validation failed The firmware package file is corrupt. Download the
firmware package from a trusted source or directly from the
HP website (
http://www.hp.com ).
Not in sync The listed VC-Enet modules are not in sync with the primary
module. VCSU cannot upgrade firmware when hardware
or software configuration changes are made to the domain.
Refrain from making configuration changes, wait for the
Checkpoint Pending status in VC to clear, and then try the
firmware upgrade operation again.
Specified enclosure is not primary in domain Specify the primary enclosure in the domain.
Before contacting HP technical support, be sure to have the Virtual Connect Support Utility log file
(vcsu-####.log) available.
VCSU error codes
Error code Details
VCSU_SUCCESS
The operation was successful.
VCSU_ERROR_FAILED The operation failed.
VCSU_ERROR_UNKNOWN An unknown failure occurred.
VCSU_ERROR_ACCESS_DENIED The user does not have the required privileges
to update the firmware.
VCSU_ERROR_INVALID_PARAMETER One or more parameters are not valid.
VCSU_ERROR_INVALID_USERNAME The user name is not valid.
VCSU_ERROR_INVALID_PASSWORD
The password is not valid.
VCSU_ERROR_FILE_NOT_FOUND The specified file could not be found.
VCSU_ERROR_FILE_READ_FAILED The specified file could not be read.
VCSU_ERROR_OA_COMMUNICATION_FAILURE Unable to communicate with the Onboard
Administrator
VCSU_ERROR_VCM_COMMUNICATION_FAILURE Unable to communicate with Virtual Connect
VCSU_ERROR_NULL_POINTER A NULL pointer was specified.
VCSU_ERROR_PREVIOUS_UPDATE_INCOMPLETE The previous firmware update operation did not
complete.
VCSU_ERROR_AUTHENTICATION_FAILURE An authentication failure occurred.
VCSU_ERROR_BUFFER_TOO_SMALL The specified buffer is too small.
VCSU_ERROR_UNSUPPORTED_FIRMWARE_PACKAGE The specified firmware package file is not
currently supported.
VCSU_ERROR_UNSUPPORTED_MODULE One or more modules are not supported.