HP NC374m PCI Express Dual Port Multifunction Gigabit Server Adapter - Manual (Page 19)

Installation and configuration 19
2. Install all HP software components for network adapters.
3. Install the Microsoft crash dump driver (KB943295 ( http://support.microsoft.com/kb/943295 )),
which enables obtaining Crash dumps.
4. Install the Microsoft iSCSI Initiator component (optional).
5. Install the HP Network Configuration Utility.
6. Configure HP license components if required.
Install Microsoft iSCSI Software Initiator
1. Launch the Microsoft iSCSI Software Initiator 2.06 or later installation wizard on the iSCSI booted
system.
2. Select all Installation Options as indicated below and please note that the MPIO option cannot be
added to a file system that is being used by an iSCSI Boot client after it has been created during the
deployment phase.
Continue to set up crash dump.
3. Complete the installation and reboot when prompted.
Set up crash dump support
The HP iSCSI crash dump driver provides a mechanism for an HP iSCSI Booted system to capture data for
analysis when a Windows 2003 OS System Stop Event is encountered (BSOD). System data is generally
saved for analysis in a file located at %systemroot%\MEMORY.DMP (for example:
C:\windows\Memory.DMP).