HP XP7 Storage - Manual (Page 28)

6. Select one or more alias volumes to remove in the Alias Volume List. Press Ctrl and click to
select multiple alias volumes, Press Shift and click to select a series of alias volumes, or click
Select All to select all alias volumes in the CU image.
7. Once one or more alias volumes are selected, click Delete to remove the selected alias volume(s)
from the selected base volume(s) and move these alias volumes back to the Free Volume List.
8. Click Apply to apply the changes.
Related topics:
•
(page 47) .
Assigning alias volumes to different base volumes
Alias volumes may be assigned to a different base volume in the same or different CU image using
the Parallel Access Volumes window.
Prerequisites
•
The number of requests to the base volume to which you are moving the alias volume is less
that 50 IOPS. Use the Resource Measurement Facility Report Analysis (RMF) or another
available software application to get this performance information.
CAUTION: To avoid a decline in processing performance, do not assign alias volumes to
a different base volume if more than 50 IOPS exist.
•
You must have Storage Administrator (Provisioning) role to reassign aliases.
•
You must enable the Remote Web Console secondary window. For more information, see the
HP XP7 Remote Web Console User Guide.
1. In the Remote Web Console main window, select Actions > Mainframe Connection > Parallel
Access Volumes.
2. In the Parallel Access Volumes window, click to change to Modify mode, and then complete
the following:
•
For LDKC, select the LDKC that includes the CU image you want to modify.
•
For CU, select the CU image that contains the aliases to be reassigned.
HP Confidential 28 Performing Parallel Access Volumes operations