HP XP P9000 for Compatible High Perf FICON Connectivity Software - Manual (Page 109)

The following example exports statistics about LU paths for the host group (host storage domain)
ID 01 for the port CL1-A:
group LU CL1-A.01:CL1-A.01
Short-range
Description
Use this subcommand to specify a term of monitoring data to be exported into files. Use this
subcommand when you want to narrow the export-target term within the stored data.
The short-range subcommand is valid for monitoring data in short range. Short-range monitoring
data appears in the following windows:
•
The Monitor Performance window when Short-range is selected as the storing period
•
The Usage Monitor tab in the Cnt Ac-S and Cnt Ac-S Z windows
•
The Usage Monitor tab in the Cnt Ac-J and Cnt Ac-J Z windows
All the monitoring items are stored in short range. Therefore, you can use the short-range
subcommand whichever operand you specify to the group subcommand. If you run the Export
Tool without specifying the short-range subcommand, the data stored in the whole monitoring
term will be exported.
The login subcommand must execute before the short-range subcommand executes.
Syntax
short-range [[yyyyMMddhhmm][{+|-}hhmm]:[yyyyMMddhhmm][{+|-}hhmm]]
Operands
The value on the left of the colon (:) specifies the starting time of the period. The value on the right
of the colon specifies the ending time of the period. Specify the term within "Short Range From
XXX To XXX" which is output by the show subcommand.
If no value is specified on the left of the colon, the starting time for collecting monitoring data is
assumed. If no value is specified on the right of the colon, the ending time for collecting monitoring
data is assumed. The starting and ending times for collecting monitoring data are displayed in the
Monitoring Term area in the Monitor Performance window.
Figure 20 Starting and Ending Time for Collecting Monitoring Data
Description Operand
yyyyMMdd indicates the year, the month, and the day. hhmm indicates the hour and the
minute.
yyyyMMddhhmm
If yyyyMMddhhmm is omitted on the left of the colon, the starting time for collecting monitoring
data is assumed. If yyyyMMddhhmm is omitted on the right of the colon, the ending time for
collecting monitoring data is assumed.
Adds time (hhmm) to yyyyMMddhhmm if yyyyMMddhhmm is specified. For example,
201201230000+0130 indicates Jan. 23, 2012. 01:30. +hhmm
Adds time to the starting time for collecting monitoring data, if yyyyMMddhhmm is omitted.
Subtracts time (hhmm) from yyyyMMddhhmm if yyyyMMddhhmm is specified. For example,
201201230000-0130
indicates Jan. 22, 2012. 22:30.
-hhmm
Export Tool command reference 109