HP XP P9000 for Compatible High Perf FICON Connectivity Software - Manual (Page 97)

Operands
Description Operand
Specifies the IP address of SVP. ip-address
If SVP is managed with IPv6 (Internet Protocol Version 6), you must specify the ip-address operand
to match the format of IPv6. If the Export Tool runs on Windows XP, the interface identifier (for
example, "%5") must be added to the end of the specified IP address.
Specifies the host name of SVP. host-name
Alphanumeric characters, hyphen, and period can be specified. Underscore (_) cannot be
specified. The host name can include a hyphen but must be enclosed by double quotation marks
(").
Example
The following example specifies the IP address of SVP as 158.214.127.170.
svpip 158.214.127.170
retry
Description
This subcommand makes settings on retries of export processing.
When an internal error occurs during export processing, the Export Tool stops processing and then
retries export processing. By default, the Export Tool can retry processing up to three times, but
you can change the maximum number of retries by using the retry subcommand.
By default, the interval between one retry and the next retry is two minutes. You can change the
interval by using the retry subcommand.
The retry subcommand must execute before the login subcommand executes.
Syntax
retry [time=m] [count=n]
Operands
Description Operand
Specifies the interval between retries in minutes, where m is a value within the range of 1 to
59. time=m
If this operand is omitted, the interval between retries is two minutes.
Specifies the maximum number of retries. count=n
If n is 0, the number of retries is unlimited.
If this operand is omitted, the maximum number of retries is 3.
Example
If the following command file is used, the interval between retries is 5 minutes and the maximum
number of retries is 10.
svpip 158.214.135.57 retry time=5 count=10login expusr passwd
show group Portshort-range 201204010850:201204010910outpath
outoption compressapply
Export Tool command reference 97