HP LaserJet P4014 Printer series - Manual (Page 51)

8 Options for Services Use this feature to enable services for
the printer:
● Remote Firmware Upgrade.
Allows you to enable or disable
upgrades to the device firmware.
● Service Loading. Allows you to
enable or disable the ability for
third-party applications to load
custom services on the device.
● Job Retention. Allows you to
enable or disable Job Retention
capabilities (Job Hold, Proof,
Store, and PIN Printing).
9 Direct Ports (USB/IEEE 1284) Use this feature to force users to
communicate with the device over a
network. Setting this option allows more
control of device usage by enforcing
network defined permissions.
When this setting is applied, the device
turns off and then back on to disable the
direct port.
HP Jetdirect Security Configuration Wizard
Use the HP Jetdirect Security Configuration Wizard to configure security settings for HP Jetdirect
print server management.
HP Web Jetadmin is a powerful web-based software utility for installing, configuring, and managing
network-connected devices. Since it can install and configure devices, it must be able to secure itself
against unwanted access. Not only can it secure itself against unwanted users, it can also secure the
devices it manages against unwanted access. Securing devices is important for the following reasons:
● Reduce printer down time
● Reduce help desk calls
● Minimize troubleshooting visits
● Minimize consumable usage
NOTE: If you use HP Web Jetadmin to configure your printer, HP recommends that you configure HP
Jetdirect security settings with HP Web Jetadmin.
As HP Jetdirect firmware is enhanced or revised, performance and security issues are addressed.
Always keep the firmware on the printer at the latest revision level to ensure maximum security. HP Web
Jetadmin provides the ability to upgrade HP Jetdirect firmware either individually or in batches
ENWW Security 41