HP ProLiant DL170e G6 Server - Manual (Page 34)

SL-APM logging 34
007:WED JAN 13 11:04:36 2010: A server was powered on in chassis Dist. Module
#1, port 5, slot 4
008:WED JAN 13 11:04:40 2010: Dist. Module 1, port 5 - all units in enclosure
were powered off
009:WED JAN 13 11:05:18 2010: Dist. Module 1, port 1 - all units in enclosure
were powered off
010:WED JAN 13 11:05:38 2010: Dist. Module 1, port 1 - all units in enclosure
were powered on
...
To clear the event log, enter CLEAR LOG.
Showing and clearing the fault log
To show the fault log, enter SHOW FAULTS.
As an example, the following text might appear on screen:
SL-APM> show faults
000:TUE DEC 15 07:45:22 2009: No response from SL enclosure on Power Manager
port 2, Dist. Module port 6
001:WED JAN 13 10:58:15 2010: No response from Dist. Module #2 for power on
command
002:WED JAN 13 10:59:29 2010: No response from Dist. Module #2 for power off
command
003:WED JAN 13 11:08:42 2010: No response from SL enclosure on Power Manager
port 3, Dist. Module port 6
004:WED JAN 13 11:09:37 2010: No response from Dist. Module to set SL enclosure
3 on port 7
005:WED JAN 13 11:09:42 2010: No response from Dist. Module to set SL enclosure
3 on port 8
006:WED JAN 13 11:09:47 2010: No response from Dist. Module to set SL enclosure
3 on port 9
007:WED JAN 13 11:09:52 2010: No response from Dist. Module to set SL enclosure
3 on port 10
008:WED JAN 13 11:10:14 2010: No response from SL enclosure on Power Manager
port 2, Dist. Module port 6
009:WED JAN 13 11:11:41 2010: No response from Dist. Module 2 to close all ports
010:WED JAN 13 11:11:46 2010: No response from Dist. Module to set SL enclosure
2 on port 3
011:WED JAN 13 11:11:51 2010: No response from Dist. Module to set SL enclosure
2 on port 4
012:WED JAN 13 11:11:56 2010: No response from Dist. Module to set SL enclosure
2 on port 7
013:WED JAN 13 11:12:01 2010: No response from Dist. Module to set SL enclosure
2 on port 8
014:WED JAN 13 11:12:06 2010: No response from Dist. Module to set SL enclosure
2 on port 9
015:WED JAN 13 11:12:11 2010: No response from Dist. Module to set SL enclosure
2 on port 10
To clear the fault log, enter CLEAR FAULTS.
External logging
To show the syslog server address configuration information, enter SHOW SYSLOG.