General commands, Working with passwords, Setting sl-apm passwords – HP ProLiant DL170e G6 Server User Manual
Page 53
General commands 53
General commands
Working with passwords
SL-APM has no factory-assigned password. You can set a password and enable or disable a password (if
you have set a password). SL-APM has an override switch if you forget your password. For more information,
see "Using the security override (on page
)".
SL-APM has only one login account. This account is the “Administrator” account. If a password is assigned
to the administrator account, the password is stored on the SL-APM controller. If you move the controller to
another SL-APM enclosure, the password moves with the controller.
Configuring Ethernet requires a password.
Setting SL-APM passwords
To set the password, enter SET PASSWORD.
You are prompted for a password when you access SSH, Telnet, or serial port access to the SL-APM. You can
have only one password for SL-APM.
The password must be between 8 and 31 characters, and can include:
•
Uppercase letters
•
Lowercase letters
•
Underscores (_)
•
Dashes (-)
•
At signs (@)
•
Pound signs (#)
•
Carets (^)
•
Ampersands (&)
•
Exclamation points (!)
•
Plus symbols (+)
•
Equal symbols (=)
•
Tilde (~)
•
Numerical values between 0–9
To save and enable the password, press Enter.
Alternatively, you can set the password by entering SET PASSWORD <”password”>. For example, enter
the following:
SET PASSWORD "alphabravo"