HP ProLiant DL170e G6 Server - Manual (Page 73)

CLI commands 73
CLI commands
Clear faults
• Command:
CLEAR FAULTS
• Description:
Clears the fault log to have 0 entries.
Clear log
• Command:
CLEAR LOG
• Description:
Clears the event log to have 0 entries.
Clear screen
• Command:
CLEAR SCREEN
• Description:
Clears a VT100/ANSI compatible terminal of all characters. Places cursor at position 1,1.
Disable Ethernet
• Command:
DISABLE ETHERNET
• Description:
Disables network access, including SSH and Telnet access and remote syslog support..
Enable Ethernet
• Command:
ENABLE ETHERNET
• Description:
Enables network access. Requires a password to be set and enabled. SSH and Telnet access must be
enabled or disabled separately. Also enables remote syslog support.