Disable password, Enable password, Ping – HP ProLiant DL170e G6 Server User Manual
Page 75
CLI commands 75
•
Description:
o
Adds a new user to the system. A single SL-APM can maintain two login accounts, including the
built-in Administrator account. Valid characters for usernames are A-Z, a-z, 0-9, _, and ‘-’.
o
All user accounts have the same permissions.
o
A password for the new account will be prompted for after the command is entered with a valid new
username. After the completion of the password entry, the new account is available for logging into
the system.
o
If the password field is not specified, then the password appears after this command is entered and
the username does not already exist.
o
Login accounts and passwords are stored separate from the board configuration. A SHOW CONFIG
command will not reveal any ADD ACCOUNT commands.
Disable password
•
Command:
DISABLE PASSWORD
•
Description:
Disables the password protection feature. Disabling password protection also disables SSH and Telnet
network access.
Enable password
•
Command:
ENABLE PASSWORD
•
Description:
Enables the password protection feature. SSH and Telnet access requires the password feature to be
enabled.
Ping
•
Command:
PING
•
Description:
Verifies network connectivity. Requires administrator access and has no restrictions.
As an example, the following text might appear on screen:
> ping x.x.x.x
Pinging x.x.x.x (x.x.x.x) with 64 bytes of data:
Reply from x.x.x.x bytes=64 time=0ms ttl=128
Reply from x.x.x.x bytes=64 time=0ms ttl=128
Reply from x.x.x.x bytes=64 time=0ms ttl=128
Reply from x.x.x.x bytes=64 time=0ms ttl=128
--- x.x.x.x ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 4000 ms
rtt min/avg/max = 0/0/0 ms