Reboot cm, Reset factory, Save – HP ProLiant DL170e G6 Server User Manual
Page 77: Save config, Set ip
CLI commands 77
Same as RESET.
Reboot CM
•
Command:
REBOOT CM <PORT#> <DMPORT#>
where:
<PORT#> refers to the SL-APM port.
<DMPORT#> refers to the SL-APM Distribution Module port.
•
Description:
Reboots the HP Moonshot 1500 Chassis CM module.
Reset factory
WARNING:
When you enter RESET FACTORY, SL-APM erases your entire configuration. Before
resetting factory defaults, consider saving your configuration. For more information on
duplicating your configuration, see "Duplicating the configuration (on page
)".
•
Command:
RESET FACTORY
•
Description:
Restores SL-APM to factory settings (including no password and Ethernet disabled) and then reboots
SL-APM.
Save
•
Command:
SAVE
•
Description:
Saves the current configuration to non-volatile memory.
Save config
•
Command:
SAVE CONFIG
•
Description:
Functionality identical to the SAVE command.
Set IP
•
Command:
SET IP {DHCP | <IP_ADDRESS> <IP_MASK>}