Show snmp, Set snmp ro, Set snmp rw – HP ProLiant DL170e G6 Server User Manual
Page 88: Set snmp contact, Set snmp location, Set snmp trapdest
CLI commands 88
Show SNMP
•
Command:
SHOW SNMP
•
Description:
Displays all parameters related to SNMP including whether SNMP is enabled, read-only and read-write
community strings, SNMP trap destinations, and the contact, name, and location settings.
Set SNMP RO
•
Command:
SET SNMP RO "<community_string>"
•
Description:
Sets the SNMP read-only public string to the string specified as a parameter.
Set SNMP RW
•
Command:
SET SNMP RW "<community_string>"
•
Description:
Sets the read-write string.
Set SNMP contact
•
Command:
SET SNMP CONTACT "<sysContact>"
•
Description:
Sets the MIB II sysContact field.
Set SNMP location
•
Command:
SET SNMP LOCATION "<sysLocation>"
•
Description:
Sets the MIB II sysLocation field.
Set SNMP trapdest
•
Command:
SET SNMP TRAPDEST <<ip_addresses>|NONE>
•
Description: