HP ProLiant DL170e G6 Server - Manual (Page 91)

CLI commands 91
• Description:
Turns off RADIUS authentication on SL-APM. Authentication through RADIUS no longer takes place, but
password checking is still done against the local password if that is still enabled. Does not clear out the
configured RADIUS servers.
Remove RADIUS server
• Command:
REMOVE RADIUS SERVER <index>
• Description:
Removes a previously added RADIUS server that matches the index indicated with the SHOW RADIUS
command.
Show RADIUS
• Command:
SHOW RADIUS
• Description:
Shows the currently configured RADIUS servers.
Set RADIUS pollnum
• Command:
SET RADIUS POLLNUM
• Description:
Number of times SL-APM polls each of the radius server indicated in the ADD RADIUS SERVER
command. This setting can only be set globally and cannot be applied to each individual RADIUS
server.
Set RADIUS pollsec
• Command:
SET RADIUS POLLSEC
• Description:
Number of seconds SL-APM waits for a reply from the RADIUS server. This setting can only be set
globally and cannot be applied to each individual radius server.