HP Notebook Projection Companion - Manual (Page 15)

Using the on-screen display
Use the 4-way button to navigate to a menu or menu items. Press up, down, left, or right to highlight
your choices through the various menus. Then, press the ENTER button to select a menu item. When
an item is selected, it changes to dark blue.
To return to the main menu, press the MENU button.
To exit the on-screen display, use the 4-way button to select Exit or Return, and then press the
ENTER button.
Select To do this
Input ● Select the input source, such as VGA or composite.
● Scan input signals.
Picture Adjust the on-screen display settings:
● Color settings, such as brightness, contrast, sharpness, color
saturation, and tint
● VGA settings, such as auto-sync, frequency, tracking, vertical
offset, and horizontal offset
● Picture mode
● Picture enhancement
● White intensity
Setup ● Select a language for the on-screen display.
● Reset all settings for the projector.
● Use auto keystone and keystone to adjust image distortion by
tilting the projector.
● Adjust advanced options, such as the projector's position (or
location), aspect ratio, and power timeout.
Help Get information about the projector, such as the on-screen display
version number and the number of hours the lamp has been used.
Using the on-screen display 11