HP StorageWorks EVA Controller HSG V8.8 Software - Manual (Page 111)

111 Command Console V2.5 User Guide
B
Interpreting SNMP Traps
This chapter describes how to understand an SNMP trap. When a physical storage
device, a logical storage unit, or a physical enclosure component changes state,
the HS-Series Agent sends an SNMP trap to every system where the SNMP
option is enabled. The trap is displayed in the Agent's list of client system entries.
An Agent SNMP trap consists of the following information fields:
■ Source IP address
■ GENERIC = 6 (6 = ENTERPRISE-SPECIFIC VALUE TO FOLLOW)
■ SPECIFIC = 0 or 1, where:
— “0” indicates that the storage component transitioned from a bad to a good
state.
— “1” indicates that the storage component transitioned from a good to a bad
state.
■ Object ID (OID) variable of the offending storage component
■ OCTET STRING value returning the name of the subsystem containing the
storage component specified by the OID Variable