HP StorageWorks EVA Controller HSG V8.8 Software - Manual (Page 112)

Interpreting SNMP Traps
112 Command Console V2.5 User Guide
Object ID (OID) Variables
Each OID is prefixed by a Base Enterprise Number (BEN) for the Command
Console product. The default BEN for Command Console Agents is as follows:
1.3.6.1.4.1.36.2.15.21
(iso.org.dod.internet.private.enterprises.dec.ema.sysobjects.ra
idmanager)
The following are the OID values used by Command Console:
■ Disk Status = BEN + .3.2.1.4
(BEN + .subsys.ssStatusTable.ssEntry.ssDiskStatus)
■ Power Supply Status = BEN + .3.2.1.5
(BEN + .subsys.ssStatusTable.ssEntry.ssPowerStatus)
■ Cooling Status = BEN + .3.2.1.6
(BEN + .subsys.ssStatusTable.ssEntry.ssFanStatus)
■ Cache Battery Charge Status = BEN + .3.2.1.7
(BEN + .subsys.ssStatusTable.ssEntry.ssCacheBatteryStatus)
■ OverTemperature Status = BEN + .3.2.1.8
(BEN + .subsys.ssStatusTable.ssEntry.ssTemperatureStatus)
■ Communication Status = BEN + .3.2.1.9
(BEN + .subsys.ssStatusTable.ssEntry.ssCommStatus)
■ EMU External Input Status = BEN + .3.2.1.10
(BEN + .subsys.ssStatusTable.ssEntry.ssEmuExtInputStatus)
■ THIS Controller Status = BEN + .3.2.1.12
(BEN + .subsys.ssStatusTable.ssEntry.ssController1Status)
■ OTHER Controller Status = BEN + .3.2.1.19
(BEN + .subsys.ssStatusTable.ssEntry.ssController2Status)
■ LUN Status = BEN + .3.2.1.27
(BEN + .subsys.ssStatusTable.ssEntry.ssLUNStatus)
If your SNMP Management Utility has the Agent MIB compiled, the utility
should display the character string values shown in parentheses above. Note that
some OID values specified in the MIB are not used for SNMP traps.