HP StorageWorks EVA Controller HSG V8.8 Software - Manual (Page 26)

About SWCC
26 Command Console V2.5 User Guide
To determine whether your system is using DHCP or WINS on Windows 2000 or
Windows 2003:
1. Right-click My Network Places on your desktop.
2. Select Properties.
3. In the Network and Dial-up Connections window which opens, right-click
the connection to be used by SWCC.
4. Select Properties.
5. Select Internet Protocol (TCP/IP), then click Properties.
The Microsoft TCP/IP Properties window opens.
SAN and TCP/IP Network Connection
By using a network connection, as shown in Figure 1 , you can configure and
monitor your storage subsystem from anywhere on your Local Area Network
(LAN). If you have a Wide Area Network (WAN) or a connection to the Internet,
you can monitor your subsystem with TCP/IP.
SWCC can include a number of Clients and Agents in a network. However, it is
suggested that you install only one HS-Series Agent on the computer that has a
connection to the HS-Series controller.