HP StorageWorks EVA Controller HSG V8.8 Software - Manual (Page 35)

About SWCC
35 Command Console V2.5 User Guide
Figure 7: Connect Network (TCP/IP) window
3. Enter the host IP name or address in the text box, and then click Detect
Subsystems.
The Client locates the subsystem connected to the host.
4. Choose the subsystem, and then click Connect.
The Client displays the Storage window.
The controller maintains a table of host port connections that can contain up to 96
named connections. However only 8 of those connections can be active at any
time. The Client shows only those connections that the controller recognizes as
online.
Connection Features and Limitations
Because of the nature of the connections you can use between the Client and your
subsystems, the features available with each connection type vary slightly. Some
connection types impose limitations on the Client's features, as noted in
Table 6 .