HP StorageWorks EVA Controller HSG V8.8 Software - Manual (Page 37)

About SWCC
37 Command Console V2.5 User Guide
Local Client/Agent Network Connection
You can run both the Client and Agent on the same Windows NT, Windows 2000,
or Windows Server 2003 host machine and connect them using a network
connection. By doing so, you can create a local connection to take advantage of
the Agent's event notification features. No special installation instructions are
necessary to implement this type of connection. Install each component as if the
Client were to run on a system remote from the host machine.
Because the Client runs only on Windows NT, Windows 2000, and Windows
Server 2003 systems, and the Agent runs on Windows NT, UNIX-based systems,
and OpenVMS, you can implement this type of connection only on a Windows
NT system. Also, you cannot use a Client with a local connection of either type
while an Agent is running on the local machine.
Note: SWCC is no longer supported on Novell NetWare systems with HBA
281540-B21 (3R-A3750-AA).
RAS
Connect
(Client
running on
a remote PC
with a
dialup
network
connection)
Supported
but not
recom-
mended.
Follow-up
operating
system
configura-
tion cannot
be
performed
remotely.
Supported
but not
recom-
mended.
Follow-up
operating
system
configura-
tion cannot
be
performed
remotely.
Supported
reliably
only while
RAS intact.
Some
events may
be missed
while
dialup
connec-
tion is
broken.
Supported
reliably
only while
RAS intact.
Some
events may
be missed
while
dialup
connec-
tion is
broken.
Supported
reliably at
host end
only. Some
events may
be missed
at Client
end while
dialup
connec-
tion is
broken.
Supported
Table 6: Feature Limitations (Continued)
Feature
Connection
Type
Create
Virtual
Disk
Delete
Virtual
Disk
Fault
Events:
Client
Visual
Notify
Fault
Events:
Paging
Notify
Windows
NT/
2000/
Server
2003
Fault
Events:
Event
Logging
Email
Notify
(UNIX/V
MS only)