Server fault indications flowchart – HP ProLiant BL25p Server-Blade User Manual
Page 92
92
HP ProLiant BL25p Server Blade User Guide
Server Fault Indications Flowchart
Symptoms:
•
Server boots, but a fault event is reported by Insight Management Agents (on
page
•
•
•
•
•
Server boots, but the internal health LED or external health LED is red or
amber
NOTE: For the location of server LEDs and information on their
statuses, refer to the server documentation.
Possible causes:
Improperly seated or faulty internal or external component
Unsupported component installed
Redundancy failure
System overtemperature condition
Item Refer
to
1
)" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on
the HP website
).
2 •
"Integrated
Management Log (on page
)" in the HP
ProLiant Servers Troubleshooting Guide located on the
Documentation CD or on the HP website
(
).
•
"Event List Error Messages" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or
on the HP webs
).
3
Server user guide or setup and installation guide, located on
the Documentation CD or the HP website
4
System Management Homepage at https://localhost:2381
)
5
"Power-On Problems ("Server Blade Power-On Problems
Flowchart" on page
)" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on
the HP website
).