HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 17)

Commands 17
version
Display the current running firmware version on all modules in a specific target enclosure.
Item Description
Syntax
vcsu -a version -i <IP> -u <USER> -p <PWD> [-b <BAY>]
Parameters:
IP IPv4 address of the active OA in the enclosure*
USER Name of the OA user with privileges to access all enclosure interconnect bays. Minimum length
is 1 character. Maximum length is 40 characters.**
PWD Password of the OA user. Minimum length is 3 characters. Maximum length is 40
characters.**
BAY Optional. The bay number of the target module. If not specified, the default is all supported
modules.
*In a multi-enclosure environment, this must be the IP address of the active OA in the primary enclosure.
**In a multi-enclosure environment, USER and PWD parameters for the Onboard Administrator must be identical across
local and all remote enclosures in the Virtual Connect domain.
Examples
Display all modules and their current firmware versions:
vcsu -a version -i 192.168.1.100 -u Administrator -p password
Display a single module and its current firmware version:
vcsu -a version -i 192.168.1.100 -u Administrator -p password -b 1