Version – HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem User Manual
Page 14
Commands 14
Perform an update using a firmware image from an FTP server on the network:
vcutil –a update –I 192.168.1.100 –u Administrator –p password –l
ftp://user:[email protected]/vcfw-120.bin
version
Display the current running firmware version on all modules in a specific target enclosure.
Item Description
Syntax
vcutil -a version -i <IP> -u <USER> -p <PWD> [-b <BAY>]
Parameters:
IP
IP address of the active OA in the enclosure
USER
Name of the OA user with privileges to access all enclosure interconnect bays
PWD
Password of the OA user
BAY
Optional. The bay number of the target module. If not specified, the default is all supported
modules.
Examples
Display all modules and their current firmware versions:
vcutil -a version -i 192.168.1.100 -u Administrator -p password
Display a single module and its current firmware version:
vcutil -a version -i 192.168.1.100 -u Administrator -p password -b 1