HP Hitachi Dynamic Link Manager Software - Manual (Page 155)

¢
If a warning dialog box is not displayed, go to the next step.
9
.
Follow the instructions shown in the messages that appear in the window.
If the KAPL09005-E message appears, stop the HDLM manager according
to the procedure in Stopping the HDLM Manager on page 4-15 . After
stopping the HDLM manager, restart the uninstallation program.
10
.
After uninstallation finishes, restart the host.
11
.
Start the Oracle RAC instance of the host.
12
.
For all the hosts that make up the cluster system, perform steps 1
through 11.
13
.
When using Oracle RAC 10g 10.1.0.3.0 or later, or Oracle RAC 11g, you
must return the values of MISSCOUNT and DISKTIMEOUT (the I/O timeout
thresholds of the voting disk) to the values that they were set to before
HDLM was installed.
For details on how to set the value of the MISSCOUNT and DISKTIMEOUT,
contact the company with which you have an Oracle support service
contract.
Uninstalling Hitachi Network Objectplaza Trace Library (HNTRLib2)
When you uninstall HDLM, if the KAPL09019-E or KAPL09020-E
message is output, follow the directions below to uninstall HNTRLib2:
1
.
Log on to Windows as a member of the Administrators group.
If the KAPL09019-E message appears during the uninstallation of HDLM,
go to step 2.
If the KAPL09020-E message appears during the uninstallation of HDLM,
go to step 3.
2
.
Execute the following command #1 to unregister program products that
include HNTRLib2:
C:\>"C:\Program Files
#2
\HITACHI\HNTRLib2\bin\hntr2cancel.exe"
"Hitachi Dynamic Link Manager"
3
.
Execute the following command #1 to check if any program is using
HNTRLib2:
C:\>"C:\Program Files
#2
\HITACHI\HNTRLib2\bin\hntr2getname.exe"
If the name of a program using HNTRLib2 is displayed, a program other
than HDLM is using HNTRLib2. If this happens, do not delete HNTRLib2.
No further steps are required.
If no names of programs using HNTRLib2 are displayed, go to the next
step.
4
.
Execute the following command #1 to uninstall HNTRLib2:
C:\>"C:\Program Files
#2
\HITACHI\HNTRLib2\unsetup\unsetup.exe"
5
.
After the uninstallation of HNTRLib2 finishes, restart the host.
#1
If you are using Windows Server 2008, execute the command from the
Administrator: Command Prompt window.
Creating an HDLM Environment
3-89
Hitachi Dynamic Link Manager User Guide (for Windows(R))