HP Hitachi Dynamic Link Manager Software - Manual (Page 170)

To display HDLM component information, execute the dlnkmgr command's
view operation with the -sys parameter specified. The following shows an
example in which the command is executed:
>dlnkmgr view -sys
HDLM Version : x.x.x-xx
Service Pack Version :
Load Balance : on(extended lio)
Support Cluster : off
Elog Level : 3
Elog File Size (KB) : 9900
Number Of Elog Files : 2
Trace Level : 0
Trace File Size(KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : on(1)
Remove LU : on
Intermittent Error Monitor : off
HDLM Manager Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
HDLM Alert Driver Ver WakeupTime ElogMem Size
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss 128
HDLM Driver Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
>
Among the displayed items, HDLM Manager, HDLM Alert Driver, and HDLM
Driver indicate the HDLM component information.
Also, you can view information for each HDLM component. Execute the
dlnkmgr command's view operation with the -sys and subsequent parameter
specified. The following shows an example in which the command is
executed:
>dlnkmgr view -sys -msrv
>dlnkmgr view -sys -adrv
>dlnkmgr view -sys -pdrv
Using the Windows Administrative Tool (Performance) to
Check Path Information
The HDLM Performance Monitor uses the Windows administrative tool
Performance to display path information.
Note:
¢
The function for checking path information using the Windows
administrative tool is not supported in a non-x86 edition of Windows
Server 2003 or Windows Server 2008.
4-12
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for Windows(R))