HP Hitachi Dynamic Link Manager Software - Manual (Page 172)

Selectable items # Description
pathid disk-number drive-letter Selecting this item displays the instance of the
selected path. The following items are displayed
for each path (sorted in ascending order of
pathid):
•
pathid
Displays AutoPATH_ID. This is the same
value as when PathID is displayed by
executing the dlnkmgr command's view
operation with the -path parameter.
• disk-number
Displays the disk number of disks displayed
in the Disk Management window of Windows.
If acquisition of a disk number fails, a
hyphen (-) is displayed.
• drive-letter
This item displays Windows drive letters.
This is the same value as when HDevName is
displayed by executing the dlnkmgr
command's view operation with the -path
parameter. If you are using a dynamic disk,
or if the drive letter is not assigned, a
hyphen (-) is displayed.
#
If no LUs are being managed by HDLM, <No Instances> will be
displayed.
Starting and Stopping the HDLM Manager
If an error occurs in the system, such as in an HDLM program, you might
need to manually stop or start HDLM to recover from the error.
Starting the HDLM Manager
During installation, the HDLM manager is registered as a Windows service
and the startup type is set to Automatic. This means that when Windows
starts, the HDLM manager will also start automatically.
If, for some reason, the HDLM manager does not automatically start, do the
following:
Log on to Windows as a member of the Administrators group. From Control
Panel, choose Administrative Tools, and then Services. In Windows
Server 2008, log on using the Administrator account, and then from the
Control Panel, choose Administrative Tools and Services. From the list of
services, double-click DLMManager, and then click the Start button.
Use the following dlnkmgr command's view operation to confirm that the
HDLM manager has started.
4-14
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for Windows(R))