HP Hitachi Dynamic Link Manager Software - Manual (Page 217)

dlnkmgr set { -lb on [ -lbtype { rr | exrr | lio | exlio | lbk |
exlbk } ]
| -lb off
| -ellv ElogLevel
| -elfs ElogFileSize
| -elfn Number-Of-ElogFiles
| -systflv TraceLevel
| -systfs TraceFileSize
| -systfn Number-Of-TraceFiles
| -pchk on [ -intvl Interval-Time ]
| -pchk off
| -afb on [ -intvl Interval-Time ]
| -afb off
| -iem on
[ -intvl Error-Monitor-Interval ]
[ -iemnum Number-Of-Times ]
| -iem off
| -lic
| -rmlu on [ -force ]
| -rmlu off
| -audlog on
[ -audlv AudlogLevel ]
[ -category Category-Value ]
| -audlog off
}
[-s]
Valid value
ElogLevel { 0 | 1 | 2 | 3 | 4 } (Default Value 3)
ElogFileSize { 100 - 2000000 }(KB) (Default Value
9900)
Number-Of-ElogFiles { 2 - 16 }(Files) (Default Value 2)
TraceLevel { 0 | 1 | 2 | 3 | 4 } (Default Value 0)
TraceFileSize { 100 - 16000 }(KB) (Default Value
1000)
Number-Of-TraceFiles { 2 - 64 }(Files) (Default Value 4)
Interval-Time { 1 - 1440 }(Minute) (Default Value 30)
(pchk)
Interval-Time { 1 - 1440 }(Minute) (Default Value 1)
(afb)
Error-Monitor-Interval { 1 - 1440 }(Minute) (Default Value 30)
Number-Of-Times { 1 - 99 }(Times) (Default Value 3)
AudlogLevel { 0 - 7 } (Default Value 6)
Category-Value { [ss] [a] [ca] |
all } (Default Value
all)
KAPL01001-I The HDLM command completed normally. Operation name =
set, completion time = yyyy/mm/dd hh:mm:ss
>
view (Displays Information)
The dlnkmgr command's view operation displays HDLM program information,
HDLM management-target device information, path information, and LU
information. If the I/O load on the dynamic disk is heavy, it might take a
while to execute the view operation.
Command Reference
6-29
Hitachi Dynamic Link Manager User Guide (for Windows(R))