HP Hitachi Dynamic Link Manager Software - Manual (Page 267)

KAPL12106-I An attempt to register the PRSV key was
successful. (PRSV key = 0123456789abcdef)
In the following example, the utility registers the PRSV key by
specifying it on the host:
>dlmprsvkey -r 0123456789ABCDEF
KAPL12104-I The operation for PRSV key registration will now
start. Is this OK? [y/n]: y
KAPL12106-I An attempt to register the PRSV key was
successful. (PRSV key = 0123456789abcdef)
-s
Specify this parameter to avoid displaying a confirmation message
upon execution of the dlmprsvkey utility.
-v
Specify this parameter to display the registered PRSV key.
Example
>dlmprsvkey -v
KAPL12116-I The registered PRSV key will now be displayed.
(PRSV key = 0123456789abcdef)
-h
Displays the format of the dlmprsvkey utility.
If you do not specify any parameters, a warning message will appear.
The dlmchkpath Utility for Checking HDLM Paths
If you install or uninstall HDLM in a multi-path configuration, the disk might
become corrupted. Use the dlmchkpath utility to check HDLM paths and to
make sure that the system is in a single-path configuration. During an
upgrade installation, a re-installation, or uninstallation of HDLM, the
dlmchkpath utility is executed automatically. If the system is in a single-path
configuration, the dlmchkpath utility displays nothing during an upgrade
installation, a re-installation, or uninstallation of HDLM. A warning dialog box
will appear if the system is in a multi-path configuration.
However, when you use one of the following methods of installing HDLM and
the system is determined to be a multi-path configuration, the installation will
terminate without displaying any warning dialog boxes:
• Upgrade installation using the unattended installation
• Re-installation using the unattended installation
When the dlmchkpath utility is executed manually, a message will appear as
shown in the execution example in Parameters on page 7-14 . This utility is
located in the following location:
HDLM-installation-folder\bin
Utility Reference
7-13
Hitachi Dynamic Link Manager User Guide (for Windows(R))