Factors that affect product performance, Restore factory settings – HP LaserJet P2035 User Manual

Page 87

Advertising
background image

8.

Verify that you have installed the printer driver for this product. Check the program to make sure
that you are using the printer driver for this product.

9.

Print a short document from a different program that has worked in the past. If this solution works,
then the problem is with the program you are using. If this solution does not work (the document
does not print) complete these steps:

a.

Try printing the job from another computer that has the product software installed.

b.

If you connected the product to the network, connect the product directly to a computer with
a USB cable. Redirect the product to the correct port, or reinstall the software, selecting the
new connection type that you are using.

Factors that affect product performance

Several factors affect the time it takes to print a job:

Maximum product speed, measured in pages per minute (ppm)

The use of special paper (such as transparencies, heavy paper, and custom-size paper)

Product processing and download time

The complexity and size of graphics

The speed of the computer you are using

The USB connection

The printer I/O configuration

The network operating system and configuration (if applicable)

Restore factory settings

To restore the product to the factory-default settings, follow these steps.

1.

Turn the product off.

2.

Turn the product on, and while it is initializing press and hold both control-panel buttons at the same
time until all the lights blink in unison.

ENWW

Restore factory settings

77

Advertising
This manual is related to the following products: