Signed drivers, Found new hardware wizard, Automatic configuration – HP ProLiant ML370 G4 Server User Manual
Page 11
Installation 11
Signed drivers
During the installation of the operating system, caution messages concerning unsigned software drivers
might appear. The caution message states, "Digital signature is not found," when drivers are about to be
installed. When prompted, click Yes to accept the drivers and continue the installation. If you are
prompted to reboot the server, click No. After the operating system installation is complete, download
digitally si
Found New Hardware Wizard
The Found New Hardware Wizard might appear during the operating system installation. Click Cancel at
the Found New Hardware Wizard. Do not attempt to install drivers until after the second login when the
operating system is fully installed.
IMPORTANT:
Do not attempt to install the drivers during the operating system installation
because the server might automatically reboot before the driver installation has been
completed. This action could result in the incorrect installation of a device.
To install drivers after the operating system installation is complete:
1.
If installing an x64 operating system, select No when prompted to select whether Microsoft®
Windows® can connect to Windows® Update to search for software.
2.
Click Next.
On the Found New Hardware Wizard window, click Next.
1.
Select Search for a Suitable Driver for My Device.
2.
Click Next.
3.
Select Specify a Location, and clear the Floppy Drive and CD-ROM options.
4.
Click Next.
5.
Enter the following path in the textbox:
C:\HPDRVRS
6.
Click OK.
7.
At the Driver Files Search Results screen, click Next.
8.
Click Finish to complete the Found New Hardware Wizard.
The setup process begins. Wait for the entire setup process to complete, including any requested restarts,
before interrupting this process or powering down the server. After the setup process completes, you can
configure the server.
IMPORTANT:
The system might complete the driver installation after the first login. Do not
perform any actions on the Manage Your Server screen. If additional drivers are loaded, the
system completes the driver installation and automatically reboots. The next time the system
presents a login prompt, log in normally and use the new operating system.
Automatic configuration
Some parts of the setup process are automatically configured, and these screens do not appear. In the
future, for information about changing any preconfigured information, refer to the operating system online
help. Of the screens that are automatically configured, the following might require later changes: