HP LaserJet 3055 - Manual (Page 214)

Print: How do I?
Use this section to answer printing questions.
Change the all-in-one print settings, such as volume or print
quality, in HP ToolboxFX
To change the default print settings in HP ToolboxFX, complete the following steps.
NOTE The changes that you make to the print settings in HP ToolboxFX apply to all future
print jobs.
1. Open HP ToolboxFX and click Device Settings.
2. Click the System Settings tab.
3. On the System Settings tab, you can modify settings that appear on the following pages. Each
page offers Help for more information.
● Device Information
● Paper Handling
● Print Quality
● Print Density
● Print Modes
● System Setup
● Date/Time
● Service
● Device Polling
● Save/Restore
4. Click Apply to save the changes that you make on these pages.
NOTE If you have similar settings in the printer driver, those settings take priority over the
settings that are established in HP ToolboxFX.
196 Chapter 11 How do I? ENWW