HP StorageWorks 2.32 Edge Switch - Manual (Page 55)

Setting Up the Application
55 HA-Fabric Manager User Guide
Installing Software on Remote Workstations
For procedures to install HAFM software on remote user workstations and
configure the workstations for connection to an HAFM appliance, see
Appendix D in this guide for the appropriate operating system.
Starting HAFM on Remote Workstations
If the HAFM application is not running or the HAFM 8 Log In dialog box is not
displayed on your remote workstation, you can start the application by following
the appropriate steps for your workstation’s operating system.
Starting HAFM on a Windows System
To start the HAFM application on a Windows 2000, Windows NT, or Windows
XP system:
1. Start the HAFM Client application using one of the following options:
■ Choose Start > Programs > HP HAFM > HAFM 8.x.
■ Double-click the HAFM 8.x desktop icon.
2. Enter the Network Address, User ID, and Password for the HAFM appliance
you intend to access.
Note: The default User ID is Administrator, and the default password is password.
3. Click the Login button. The HAFM client accesses the HAFM appliance, and
the View All - HAFM 8 window displays, as shown in Figure 16 .
Starting HAFM on an HP-UX, AIX, Linux, or Solaris System
To start the HAFM application on an HP-UX, AIX, Linux, or Solaris system from
the home directory:
Note: If you have saved the HAFM application in a different location, type in the
appropriate directory names.
1. Go to the location where you installed the application (the default is /usr ).