HP Integrity rx2800 i2 Server - Manual (Page 74)

Scripted deployment 74
Return codes
HP SUM has consolidated return codes from Linux and Windows® smart components into a new, enhanced
return code mapping. These return codes determine the status of the component installation. You can also use
return codes in a script to control the execution of the script and determine any required branching.
In Linux, the negative return codes are reported. These return codes are determined by subtracting the
negative value from 256.
To view the installation log file locations, see "Viewing the installation results (on page
44 )."
Return code Value Linux Windows® Text
SUCCESS_NO_REBOOT 0 0 0 The installation was successful.
SUCCESS_REBOOT 1 1 1 The installation was successful, but
a reboot is required.
SUCCESS_NOT_REQUIRED 3 3 3 The component was current or not
required.
FAILURE_GENERAL -1 255 255 A general failure occurred. For
details, see the error log.
FAILURE_BAD_PARM -2 254 254 A bad input parameter was
encountered.
FAILURE_COMPONENT_FAILED -3 253 253 The installation of the component
failed.
Windows smart component return codes
Error level Meaning
0 The smart component failed to install. For more details, see the log file.
1 The smart component installed successfully.
2 The smart component installed successfully, but the system must be restarted.
3 The installation was not attempted because the required hardware is not present, the software
is current, or there is nothing to install.
Linux smart component return codes
Single target servers:
Error level Meaning
0
The smart component installed successfully.
1 The smart component installed successfully, but the system must be restarted.
2 The installation was not attempted because the required hardware is not present, the software
is current, or there is nothing to install.
3 The smart component failed to install. For more details, see the log file.
Multi-target servers:
Error level Meaning
0 The installation of the deliverable is successful. No reboot is required.