Error statistics – HP StorageWorks 2.64 Director Switch User Manual

Page 123

Advertising
background image

Monitoring Products

123

Embedded Web Server User Guide

■

LIPs Detected — A loop initialization primitive (LIP) was detected, which
means the loop was completed.

■

LIPs Generated — A loop initialization primitive was created to initialize a
loop.

Error Statistics

The Error Statistics include these transmit and receive values:

■

Link failures — Number of link failures recorded because a not operational
sequence (NOS), protocol timeout, or port failure was detected.

■

Sync losses — Number of loss-of-synchronizations detected because an
attached device was reset or disconnected from the port.

■

Signal losses — Number of loss-of-signal errors detected because the
attached device was reset or disconnected from the port.

■

Primitive sequence errors — Number of primitive sequence protocol errors
received from an attached device, which indicates a Fibre Channel link-level
protocol violation.

■

Discarded frames — A received frame could not be routed and was
discarded because the frame timed out due to an insufficient buffer-to-buffer
credit, or the destination device was not logged into the product.

■

Invalid transmission words — Number of invalid transmission words from
an attached device. This indicates that a frame or primitive sequence arrived
at the port corrupted.

■

CRC errors — A received frame failed a cyclic redundancy check (CRC)
validation, indicating the frame arrived at the port corrupted. Frame
corruption may be caused by device disconnection, an optical transceiver
failure at the device, a bad fiber cable, or a poor cable connection.

■

Delimiter errors — Number of times that the switch detected an
unrecognized start-of-frame (SOF), an unrecognized end-of-frame (EOF)
delimiter, or an invalid class of service. This indicates that the frame arrived
at the switch’s port corrupted. This corruption can be due to
plugging/unplugging the link, bad optics at either end of the cable, bad cable,
or dirty or poor connections. Moving the connection around or replacing
cables can isolate the problem.

■

Address ID errors — A received frame had an unavailable or invalid Fibre
Channel destination address, or an invalid Fibre Channel source address. This
typically indicates the destination device is unavailable.

Advertising