Preventing electrostatic discharge, Grounding methods – HP ProLiant ML310 G3 Data Protection Storage Server User Manual

Page 50

Advertising
background image

•

Always be properly grounded when touching a static-sensitive

component or assembly.

Preventing electrostatic discharge

To prevent electrostatic damage, observe the following precautions:

•

Avoid hand contact by transporting and storing products in

static-safe containers.

•

Keep electrostatic-sensitive parts in their containers until they arrive

at static-free workstations.

•

Place parts on a grounded surface before removing them from

their containers.

•

Avoid touching pins, leads, or circuitry.

•

Always be properly grounded when touching a static-sensitive

component or assembly.

Grounding methods

There are several methods for grounding. Use one or more of the following

methods when handling or installing electrostatic-sensitive parts:

•

Use a wrist strap connected by a ground cord to a grounded

workstation or computer chassis. Wrist straps are flexible straps

with a minimum of 1 megohm ± 10 percent resistance in the

ground cords. To provide proper grounding, wear the strap snug

against the skin.

•

Use heel straps, toe straps, or boot straps at standing workstations.

Wear the straps on both feet when standing on conductive floors

or dissipating floor mats.

•

Use conductive field service tools.

•

Use a portable field service kit with a folding static-dissipating

work mat.

If you do not have any of the suggested equipment for proper grounding,

have an authorized reseller install the part.

NOTE:

For more information on static electricity, or for assistance with product

installation, contact your authorized reseller.

50

Regulatory compliance and safety

Advertising