HP NC382i Integrated Dual Port PCI Express Gigabit Server Adapter - Manual (Page 11)

Installation and configuration 11
3. Boot the updated Windows Server 2008 DVD. Navigate to the setup screen and select the Load
Drivers option and then browse the USB device for the HP Windows Server 2008 Multifunction
Gigabit Server Adapter driver files for your specific adapter.
4. Select the bxvbd.inf driver file.
5. Select the Load Drivers option again and select the bxois.inf file.
6. Return to the Windows Server 2008 Setup screen. The iSCSI storage device identified in the boot
phase appears as an available iSCSI target for installing the Windows Server 2008 operating
system.
7. Continue with Windows Server 2008 installation.
Installation using the Microsoft iSCSI Software Initiator
1. Locate the HP Windows Server 2008 Multifunction Gigabit Server Adapter component
CPxxxxxx.exe file obtained in "Downloading the SoftPaq File." Extract the contents to a USB memory
device.
2. Select Disable for the Windows HBA Boot Mode parameter. For more information, see "Configure
iSCSi parameters (on page 7)."
3. Boot the Windows Server 2008 DVD. Navigate to the setup screen and select the Load Drivers
option and then browse the USB device for the HP Windows Server 2008 Multifunction Gigabit
Server Adapter driver files for your specific adapter.
4. Select the bxvbd.inf (NC382x) driver file.
5. Select the Load Drivers option again and select the bxnd.inf file.
6. Return to the Windows Server 2008 Setup screen. The iSCSI storage device identified in the boot
phase appears as an available iSCSI target for installing the Windows Server 2008 operating
system.
7. Continue with Windows Server 2008 installation.
Windows Server 2003 installation
Install Windows Server 2003 using F6
To install a Windows operating system directly to an iSCSI target from a Windows CD-ROM, create
standard DOS-formatted (FAT) diskettes with files from the SoftPaq located in the
apps\bcm_iscsi\nc382\x86 and apps\bcm_iscsi\nc382\x64 folders. To create F6 diskettes, navigate
to the appropriate folder and copy the contents to the top level folder of a formatted MS-DOS bootable
diskette.
When attempting to install Windows 2003, ensure that the iSCSI target contains no previously installed
operating system images and that the disk contains a zero Master Boot Record (MBR).
1. Create Windows_F6 Diskette 1:
o For a Windows 2003 x86 operating system, navigate to the apps\bcm_iscsi\nc382\x86\disk1
directory and copy the files to the root directory of disk 1.
o For a Windows 2003 x64 operating system, navigate to the apps\bcm_iscsi\nc382\x86\disk1
directory and copy the files to the root directory of disk 1.
2. Create Windows_F6 Diskette 2: