3 verifying remote copy settings, 1 verifying the primary/local remote copy setting, Verifying remote copy settings – HP 3PAR Application Software Suite for Oracle User Manual
Page 185: Verifying the primary/local remote copy setting
9.5
Verifying Remote Copy Settings
Recovery Manager 3.0.3/3.0.4 for Oracle User’s Guide
9.3 Verifying Remote Copy Settings
9.3.1 Verifying the Primary/Local Remote Copy Setting
To verify the primary/local Remote Copy setting:
1
Log in to the database host as root user.
2
Connect to the primary/local InServ Storage Server from the primary host using either SSH
or RSH:
where:
◆
<username>
is the InServ Storage Server user.
◆
<
ss_name>
is the system name of the primary/local InServ Storage Server, which is
attached to the database host.
◆
You are not prompted for a password if set up correctly.
3
Verify the Remote Copy ports.
The following is sample output from the
showport -rcip
command:
4
Verify the Remote Copy primary/local group (datafile group and archive log group).
<db_host># ssh <username>@<ss_name>
cli% showport -rcip
NOTE: Ensure the ports are in the
ready
state.
N:S:P State HW Address IP Address Netmask Gateway MTU
0:5:1 ready 0002B3C03DF2 193.1.1.1 255.255.255.0 - 1500
1:5:1 ready 0002B3C03E94 194.1.1.1 255.255.255.0 - 1500
cli% showrcopy groups <group name>