HP Compaq t5710 Thin Client - Manual (Page 114)

6-54
Setup Menus
Application Keypad
Factory default: Unselected
The setting of this option determines the effect of pressing keys in the keypad on the
right side of the keyboard.
When unselected, the keypad is in numeric mode and keys will generate the characters
shown on the key caps. When selected, the keypad is in application mode and keys
will generate control functions when pressed. The top row of four keys act as the
equivalent DEC function keys PF1 through PF4.
Application Cursor Keys
Factory default: Unselected
When this option is selected the cursor keys will generate application program codes
when pressed. Unselected, the keys will generate normal cursor movement commands.
Display Controls
Factory default: Unselected
The setting of this option determines whether received control codes are actioned or
displayed. When selected, a representation of most control codes will be displayed on
the screen.
Display Error Codes
Factory default: Selected
This option determines whether or not a chequerboard symbol is displayed when the
delete code is received.
Jump Scroll
Factory default: Unselected
The setting of this option determines whether data is scrolled one or several lines at a
time when the window becomes full. Data will scroll up several lines at a time when
this is selected.
80 / 132 Clears Screen
Factory default: Selected
This option determines whether or not data is cleared from the display when the
number of columns is changed.
Backspace = DEL
Factory default: Unselected
The setting of this option determines whether or not a backspace command performs a
delete.