HP 3PAR InForm Software Licenses - Manual (Page 17)

Source System Host Link Configuration Issues
Problem
Not Configured. One of the peer ports on the destination system is not configured, or has an
invalid configuration status.
Solution 1
On a source system running InForm OS 2.2.4 or earlier, one or more ports on the source systems
is using the wrong persona. Use the showport CLI command to check the persona. Use the sethost
CLI command to specify the correct persona setting for the host.
Solution 2
Verify the link status is OK. From the Main Menu, select option 2 ==> Analyze Migration Links.
Then select option 1 ==> Analyze Destination Array Peer Ports from the Analyze Migration Links
Menu.
Problem
Invalid Configuration.
Solution 1
One or more source system host ports have an unsupported persona for data migration. Use the
showhost
CLI command to check the host persona on the source system. Use the sethost CLI
command to change the host persona on the source system.
Solution 2
One or more of the host port connection types is not configured as point. Use the showport CLI
command on the source system to verify the peer port connection type for all ports is set to point.
Use the controlport CLI command to set the peer port connection type to point.
Solution 3
One or more of the host port connection modes is not set to host. Use the showport CLI command
on the source system to verify the connection mode for all ports is set to host. Use the controlport
CLI command to set the connection mode.
Problem
Invalid Zoning.
Cause 1
When one or both of the destination system peer port WWNs appears on more than one source
system host port.
Solution 1
Rezone the switch fabric so that there is a 1:1 mapping between destination system peer ports
and source system host ports.
Cause 2
When one or both of the destination system peer ports WWNs do not appear on any source
system host port.
Solution 2
Verify the switch fabric has the destination system peer ports zoned to the source system host ports.
Cause 3
When the source system host ports are not on different nodes.
Solution 3
Source System Host Link Configuration Issues 17