HP Linux Server Management Software - Manual (Page 35)

Toolkit utilities 35
Command-line argument Description
MY_SYS_RAM=TotalRAM <TotalRAM>768</TotalRAM>, HWQUERY
produces the following:
MY_SYS_RAM=768
hwquery hpdiscovery.xml allboards.xml
"TEST=Smart Array"
For a hpdiscovery.xml file that indicates a Smart
Array 5i Controller is present, HWQUERY
produces the following:
TEST=Smart Array 5i Controller
hwquery hpdiscovery.xml allboards.xml
MYRAM=TotalRAM MYROMDATE=ROMDate
For a hpdiscovery.xml file that contains
<TotalRAM>768</TotalRAM> and
<ROMDate>11/15/2002</ROMDate>,
HWQUERY produces the following:
MYRAM=768
MYROMDATE=11/15/2002
hwquery hpdiscovery.xml allboards.xml
"TEST=smart array 5i"
Although the controller is present, HWQUERY
produces the following:
TEST=
This behavior is correct. The string is case-
sensitive, and the argument uses lowercase
lettering instead of the uppercase found in the
allboards.xml file.
Using CONREP
The CONREP utility generates a system configuration XML file used to duplicate the hardware
configuration of one ProLiant server onto another. The CONREP utility uses the hardware configuration
XML file to identify and configure the system, which defaults to conrep.xml. You can change the default
using the -x option. The actual system configuration file is captured as an XML data file. The default name
is conrep.dat.
CAUTION: Improper modification of the CONREP data files can result in the loss of critical
data. Only experienced users of the Toolkit should attempt to modify the data files. Because
of the potential risk of data loss, take all necessary precautions to ensure that mission-critical
systems remain online if a failure occurs.
The CONREP utility reads the state of the system environment settings to determine the server
configuration and writes the results to a file that you can edit. The CONREP utility uses the data in the
generated file to configure the target server hardware.
The CONREP utility uses an XML definition file to determine what information to retrieve from and restore
to the server. You can modify this file to update new features or restrict features when capturing
configurations. The default conrep.xml file contains common hardware configuration settings for most
ProLiant 300, 500, and 700 series servers. Some platforms require special settings that are contained in
other XML files. These files are included in the Scripting Toolkit and are available from the HP website
(
http://www.hp.com ) on the support page for each platform. You can use these files with the -x option to
configure systems that are not supported by the default hardware configuration file.
Many fields in conrep.xml file contain help text that enables you to configure the field meanings. This
information is also added to the conrep.dat file. Hardware features that are not supported by the existing
platform or ROM version appear in the conrep.dat file.