HP Linux Server Management Software - Manual (Page 36)

Toolkit utilities 36
IMPORTANT: The file format for the DOS version of CONREP and the current version of
CONREP are not compatible.
CONREP command-line syntax
conrep [-s | -l] [-xhardware_definition_file] [-
fsystem_configuration_file] [-?]
CONREP command line arguments
Command-line argument Description
-s This argument saves the system configuration
to a file.
-l This argument loads the system configuration
from a file and writes it to the target server.
-xfilename This argument defines the name and location
of the XML hardware definition file. The
default file is conrep.xml.
-ffilename This argument defines the name and location
of the system configuration data file. The
default file is conrep.dat.
-? This argument displays help information.
CONREP return codes
Value Meaning
0 The command was completed successfully.
1 The system configuration data file (conrep.dat) is corrupt or not found.
2 The hardware definition data file (conrep.xml) is corrupt or not found.
3 The Health Driver is required for this operation, but is not loaded.
4 The system administrator password is set. The settings cannot be changed unless this
password is cleared.
5 Reserved.
6 The XML hardware definition file (conrep.xml) is corrupt or not appropriate for the
current platform.
CONREP return codes for HP ProLiant 100 series servers
Value Meaning
0 The command was completed successfully.
1 TheXML definition file (for example, conrep.xml) is corrupt.
2 The data file (conrep.xml) is corrupt.