HP Linux Server Management Software - Manual (Page 62)

Toolkit utilities 62
</GET_GLOBAL_SETTINGS>
Setting a configuration
A specific configuration can be sent to the iLO, iLO 2, iLO 3, or RILOE II by using the command format:
HPONCFG /f add_user.xml /l log.txt
In this example, the input file has contents:
<!-- Add user with minimal privileges to test default setting of
assigned privileges to 'N' -->
<RIBCL version="1.2">
<LOGIN USER_LOGIN="x" PASSWORD="x">
<USER_INFO MODE="write">
<ADD_USER USER_NAME="Landy9" USER_LOGIN="mandy9"
PASSWORD="floppyshoes">
<RESET_SERVER_PRIV value="Y" />
<ADMIN_PRIV value="Y" />
</ADD_USER>
</USER_INFO>
</LOGIN>
</RIBCL>
The specified user will be added to the device.
HPONCFG command-line examples
For HPONCFG command line examples, see the appropriate user guide at the Remote Management
website ( http://www.hp.com/servers/lights-out ).
Using HPQLAREP
You must edit the text file to insert the WWID of the boot volume and the LUN number that they will boot
from. The hpqlarep utility discovers the WWID of the HBA in the server blade and writes the information
in the text file. The text file presents the options in human readable format. The hpqlarep utility updates the
hardware with the boot volume WWID and boot LUN read from the text file.
HPQLAREP command-line syntax
hpqlarep /s filename hpqlarep /l filename
[HBA0] WWID=11223344 HostAdapterBiosEnable=1 SelectBootEnable=1
BootDeviceWWID=22334455 BootDeviceLUN[0]=1111
HPQLAREP command-line arguments
Command-line argument Description
hpqlarep /s filename This argument saves the HBA configuration to the filename.
hpqlarep /l filename This argument loads the HBA configuration to the filename.
Where filename has the following format:
[HBA0] Section for each HBA
WWID=11223344 Read-only variable
HostAdapterBiosEnable=1 Read-only variable