HP 3PAR Operating System Software Licenses - Manual (Page 34)

c. If required, click the Target CHAP check box. The CHAP Name field displays the system
name.
d. Enter a secret/password in the CHAP Secret field for Target CHAP.
NOTE: Rules for the CHAP group box in the following step are as follows:
•
When the Initiator CHAP check box is selected, CHAP Name is initialized with the host
name (default).
•
The Target CHAP check box is enabled when the Initiator CHAP check box is selected.
•
The CHAP Secret field is required if a CHAP Name is entered.
•
Target CHAP is optional.
•
Target CHAP can be populated only if Initiator CHAP is populated.
3. Click Next to view summary information, or click Finish to close the wizard and configure the
host with the information gathered.
Summary
Review the summary information, and then click Finish.
Create Virtual Volumes
Welcome to the Create Virtual Volumes Wizard
The Welcome screen describes the settings and properties you can assign to a virtual volume.
NOTE: If you click to select the Click here to skip this step in the future check box and later want
to reinstate the Welcome screen, delete the following file:
C:\Users\<username>\SmartStart\preferences\preferences.xml
Configure Virtual Volume
1. In the General group box:
a.
System - Select the system where the volume will be created.
b. Domain - Select the domain in which the volume will reside. Select <none> if not
applicable.
c. Name - Enter a name for the new volume. Names are case-sensitive.
d. ID - Enter an ID for the new volume if you click to clear the auto box (this option is shown
only if Show advanced options is selected).
e. Use Template - Select the volume template to apply to the new volume. If this is not
required, select <none>.
f. Comments - Enter any notes about the volume.
34 Configure Storage