Part i using smartstart to configure storage, I using smartstart to configure storage – HP 3PAR Operating System Software Licenses User Manual
Page 6
Part I Using SmartStart to Configure Storage
“Prepare to Configure” (page 9)
1.
Gather the information you will need to use SmartStart to
configure your HP 3PAR StoreServ 7000 Storage system.
“Understanding Storage” (page 40)
2.
Learn more about how HP 3PAR storage systems work.
NOTE:
If you are not familiar with HP 3PAR storage systems,
HP highly recommends that you read this short introduction.
“Setting Up the Service Processor” (page 13)
3.
Set up the Service Processor and the HP 3PAR StoreServ 7000
Storage system.
“Setting Up the HP 3PAR StoreServ Storage System” (page 17)
“Connect to the HP 3PAR StoreServ 7000 Storage System”
(page 22)
4.
Connect to your new storage system.
“Configure the Hosts” (page 23)
5.
Configure Fibre Channel host connections or iSCSI host
connections.
6.
Create storage and add the ability to use virtual volumes on
Microsoft Windows Server 2008 R2 and Windows Server
2012 server host systems.
“Install the HP 3PAR Management Console” (page 39)
7.
Install the HP 3PAR Management Console in order to manage
storage and access additional features and functionality.